Rob Stimpson
- Total activity 889
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 444
Articles
Recent activity by Rob Stimpson-
(PPSQ) Replacing the Nitrogen Gas Cylinder
Occasionally check the nitrogen gas cylinder's pressure regulator during system operation and, if the residual pressure is low, replace the cylinder as soon as possible. (As a rough guide, replace ...
-
(PPSQ) Disposing of Waste Liquid
As sample analysis is repeated, the amount of liquid in the waste bottle increases.Occasionally check the amount of liquid in the waste bottle and dispose of it before the bottle becomes full. CA...
-
(PPSQ) Replacing Reagents
The procedure for replacing reagents is described below. After replacement, it is recommended that the reagent and solvent bottles are purged in order to prevent reagent degradation.The replacement...
-
(PPSQ) Replacing the column - Gradient System
« Removing the column » 1. When the pump is running, push [pump] on the pump.2. Open the cover of the column oven.3. Remove the tube connecting to the inlet/outlet of the column. « Attaching th...
-
(PPSQ) Replacing the column - Isocratic System
« Removing the column » 1. When the pump is running, push [pump] on the pump.2. Open the cover of the column oven.3. Remove the tube connecting to the inlet/outlet of the column. « Attaching the ...
-
(PPSQ) Starting Up the Graient System(Startup After Long-Term Shutdown)
1. Turning ON Power 1) Turn ON the power to the detector and the column oven. 2) Turn ON the power to the PPSQ. 3) Turn ON the power to the PC and the display. 4) Double-click the icon on the...
-
(PPSQ) Starting Up the Gradient System(Startup After Short-Term Shutdown)
1. Turning ON Power 1) Turn ON the power to the detector and the column oven. 2) Turn ON the power to the PPSQ. 3) Turn ON the power to the PC and the display. 4) Double-click the icon on the ...
-
(PPSQ) Starting Up the Isocratic System(Startup After Long-Term Shutdown)
1. Turning ON Power 1) Turn ON the power to the detector and the column oven. 2) Turn ON the power to the PPSQ. 3) Turn ON the power to the PC and the display. 4) Double-click the icon on the...
-
(PPSQ) Starting Up the Isocratic System(Startup After Short-Term Shutdown)
1. Turning ON Power 1) Turn ON the power to the detector and the column oven. 2) Turn ON the power to the PPSQ. 3) Turn ON the power to the PC and the display. 4) Double-click the icon on the ...
-
(PPSQ) Changing the Number of Analysis
It's possible to change the number of analyses during the execution of sample analysis. 1. Click [Change Number of Cycles] on the registration frame of the sequence analysis. [Change Number of Cyc...